9 Best Covers for Pit Boss Pellet Grills (November 2026)
The best Pit Boss pellet grill covers include the Pit Boss 73700 Grill Cover for 700FB for 700FB owners, the Utheer 73700 600D Grill Cover for Pit for Lexington and 700 models, and the QuliMetal Grill Cover for Pit Boss Austin for Austin XL and 1000 series.
On this page (10 sections)
- Best Pit Boss pellet grill covers by model and size
- Pit Boss pellet grill cover comparison by size
- How we compared these Pit Boss covers
- Which Pit Boss models do these covers fit?
- What size cover do I need for my Pit Boss grill?
- 600D vs 1000D fabric: which should you choose?
- Drawstring, buckles or Velcro: which closure holds best?
- Do you need vents, handles or reflective tape?
- How do I keep a pellet grill cover in good shape?
- Verdict: which Pit Boss pellet grill cover should you buy?
The best Pit Boss pellet grill cover for most owners is the Pit Boss 73700 for the 700FB, because the cut, drawstring and PVC backed polyester match that model. If you own an 820 or 850, start with the GuardKove 1000D or the QuliMetal 850 and 820 pick.
If you own an Austin XL or a 1000 series grill, start with the QuliMetal Austin pick or the larger GuardKove.
Our score weighs specs, features and buyer feedback against what you are shopping for. A cover earns a higher score here when it fits a named Pit Boss model, uses a tougher fabric or coating, and closes in a way that holds up in wind.
A cover loses points when the fit list is narrow, the size is easy to get wrong, or the closure does little to stop the fabric from moving.
Fit matters more than fabric weight for most buyers. A thick cover that pools water at the base will cause more trouble than a lighter cover that sheds rain cleanly.
Measure your grill first, then read the size line for each pick below.
You will also want to match the cover to how your grill sits. A grill under a roof needs less waterproofing than one that takes direct rain all year.
A grill on an open patio needs a stronger closure than one in a sheltered corner.
Our team compared sizes, materials, closures and model lists across these nine covers. We did not run hands on tests, and we rely on the specs and buyer patterns shown for each model.
That keeps this guide honest about what we checked and what we did not.
Our picks at a glance
-
1
-
2
Best for Lexington and 700 modelsUtheer 73700 600D Grill Cover for Pit
9.6/10 our score
See it on Amazon -
3
Best for Austin XL and 1000 seriesQuliMetal Grill Cover for Pit Boss Austin
9.5/10 our score
See it on Amazon
- 4
Check itComnova Grill Cover for Pit Boss 700FB
Best for smaller 700 class grills - 5
Check itGuardKove 1000D Heavy Duty Grill Cover
Best heavy duty option for 820 and 850 - 6
Check itQuliMetal Grill Cover for Pit Boss 850/820/Z
Best for 820 and 850 with vents - 7
Check itGuardKove 1000D Heavy Duty Grill Cover
Best heavy duty option for 1000 series - 8
Check itSHINESTAR Heavy Duty Grill Cover for Pit
Best for 850 DX owners - 9
Check itPit Boss 800 Series Deluxe Grill Cover
Best for 820 Deluxe and Sportsman
Best Pit Boss pellet grill covers by model and size
The right pick changes with your grill. Green Mountain owners can compare Green Mountain grill covers.
A 700FB owner, an 850 owner and an Austin XL owner have almost nothing in common on fit, so use this section as a size map.
Find your model group first, then compare fabric and closure inside that group.
How to read the size lines
Each cover lists width, depth and height in inches. Compare all three numbers with your grill, not just the width.
Shelves, chimneys and side trays add depth and height that a bare cabinet measurement misses.
Pit Boss 73700 Grill Cover for 700FB: Best for 700FB owners
- Fits Pit Boss 700FB
- Drawstring closure
- PVC backed polyester
A model specific cover for the 700FB with a drawstring that pulls the bottom in for a secure fit.
Pros
- Cut for the 700FB
- Drawstring closure
- PVC backed polyester
Cons
- Only fits the 700FB size group
- No vents or handles stated
This cover suits owners who want the exact Pit Boss cut for a 700FB. It measures 44 inches long, 29 inches wide and 47 inches high, and Pit Boss lists it for the 700FB in the 73700 part number.
The build uses PVC backed polyester with a drawstring closure. That pairing gives a form fitting drape that pulls in at the base, which helps rain run off instead of pooling on a loose skirt.
Daily use is simple. Drape it over a cooled grill, pull the drawstring snug, and leave enough room at the base so the fabric does not drag in puddles.
The light weight, at 1.8 pounds, makes storage easy in a garage bin.
The trade off against the Utheer and Comnova picks is range. This cover does not stretch to Lexington or Pro 600 models, so it only wins when your grill is truly a 700FB.
If your model matches, that exact cut is the point.
Utheer 73700 600D Grill Cover for Pit: Best for Lexington and 700 models
- 42 x 28.5 x 38 in
- 600D waterproof polyester
- Adjustable drawstring straps
- Reflective tape and handles
A 600D cover sized for 700FB, Lexington 500 and 540, Classic 700, Pro 600 and Tailgater models.
Pros
- Wide model list in the 700 class
- Reflective tape and side handles
- PVC liner
Cons
- Check side shelves before ordering
- Closer fit can be harder to place
This pick suits owners in the 700 class who may own a Lexington 500 or 540, a Classic 700, a Pro 600 or a Tailgater. It measures 42 inches long, 28.5 inches wide and 38 inches high.
The fabric is 600D waterproof polyester oxford with an extra PVC liner. Adjustable drawstring straps at the bottom pull in the extra fabric, and reflective tape helps you spot the grill at night.
Side handles help with two jobs. They make it easier to lift the cover off a tall grill, and they give you a loop to hang it for storage.
The smooth fabric rinses clean with water and air dries.
The trade off is fit sensitivity. The maker notes that side shelves and added accessories can change the fit, so fold shelves down and measure the full outside size.
This cover rewards a careful measurement more than the Pit Boss 73700 does.
QuliMetal Grill Cover for Pit Boss Austin: Best for Austin XL and 1000 series
- 62 x 24 x 47 in
- 600D Oxford fabric
- Elastic drawstring
- Ventilation ports
A large 600D cover for Austin XL, Rancher XL 1000 and 1100 Pro size grills, with vents for airflow.
Pros
- Fits the large 1000 class
- Ventilation ports
- Adjustable drawstring
Cons
- Does not fit combo grills with side smokers
- Large size needs storage space
This cover suits Austin XL and large 1000 series owners. It measures 62 inches wide, 24 inches deep and 47 inches high, and fits the Austin XL, Rancher XL 1000, 1100 Pro and Pro 1150 group.
The fabric is 600D Oxford with high density stitching for tear resistance. An elastic drawstring at the bottom keeps the cover snug, and ventilation ports let air circulate to reduce moisture buildup.
That vent detail matters on a large grill that lives outside. A big cabinet traps more humid air, and airflow helps protect metal parts from dampness between cooks.
The trade off is exclusion list length. This cover does not fit triple function combo grills, the Platinum Laredo 1000 or 1100 models with a side smoker.
Check your exact model number before you order, especially if your grill has extra chambers.
Comnova Grill Cover for Pit Boss 700FB: Best for smaller 700 class grills
- 38 x 28 x 38 in
- 600D Oxford cloth with PU coating
- Adjustable Velcro straps
A 600D PU coated cover for the 700FB, Lexington, Pro 600, Classic 700 and Tailgater group.
Pros
- PU coating instead of PVC
- Velcro straps adjust the fit
- UV resistant coating
Cons
- Not for grills with side shelves
- Smaller size than the Pit Boss 73700
This cover suits owners of smaller 700 class grills, including the 700FB, 440FB1, Lexington 500 and 540, Pro Series 600, Classic 700 and Tailgater. It measures 38 inches wide, 28 inches deep and 38 inches high.
The fabric is 600D Oxford cloth with a waterproof PU coating and UV resistant coating. PU is softer and more breathable than PVC, which can make the cover easier to fold and store.
Adjustable Velcro straps on each side pull the cover tighter for different grill sizes. That adjustability helps when a shelf adds a little width, but it does not replace a real measurement.
The trade off is depth and shelf space. This cover does not fit grills with side shelves, such as the PB 440D2, and its 38 inch height is lower than the 47 inch Pit Boss 73700.
Choose it for a compact grill, not for a tall setup.
GuardKove 1000D Heavy Duty Grill Cover: Best heavy duty option for 820 and 850
- 56 x 27 x 50 in
- 1000D Oxford fabric
- Buckle straps
- Side zipper
A 1000D cover for 820 Deluxe, Pro 850 and Competition models, with buckles and a side zipper.
Pros
- 1000D fabric
- Zipper makes removal easier
- Wind resistant buckles
Cons
- Not for Austin XL or 1100 Pro
- Heavier fabric to fold and store
This cover suits 820 and 850 owners who want a heavier fabric. It measures 56 inches wide, 27 inches deep and 50 inches high, and fits the 820 Deluxe, Pro Series 850, Competition 820 and 850, and Sportsman 820.
The fabric is 1000D high density Oxford cloth, which GuardKove says has twice the tear strength of 420D, 600D and 900D fabrics. The build adds a PVC lining and heat sealed tape for waterproofing.
Practical details sell this pick. Buckle straps on both sides hold the fit in strong wind, and a side zipper lets you open the cover without pulling the whole fabric off the grill.
That helps one person remove it after a cook.
The trade off is size limits. It does not fit the Austin XL 1000S or the 1100 Pro series, and the heavier fabric takes more storage space.
It is a fit first choice for the 820 and 850 class, not a universal Pit Boss cover.
QuliMetal Grill Cover for Pit Boss 850/820/Z: Best for 820 and 850 with vents
- 50 x 56 x 27 in
- 600D polyester with PVC coating
- Reflective tapes
- Air vents
- Side handles and drawstring
A 600D cover for 820, 850 and Z Grills 700 series models, with vents, reflective tape and handles.
Pros
- Fits 820 and 850 groups
- Vents help airflow
- Handles aid moving and storage
Cons
- Not for Austin XL or 1000S
- Needs a clear check on side trays
This cover suits 820 and 850 owners who want vents and handles at a 600D level. It measures 50 inches long, 56 inches wide and 27 inches deep, and fits the 820 Deluxe, Pro 850, Competition 820CS1 and Sportsman 820 group.
The fabric is heavy duty 600D polyester with a waterproof PVC coating inside. Reflective tapes aid visibility at night, and three dimensional vents help prevent water vapor from building up inside.
Fabric handles on both sides help you install and move the cover, and they also work for hanging and storage. The elastic drawstring at the bottom fastens the cover so wind does not lift it.
The trade off is the no side tray note. The maker designs this fit for models with no side tray, so check your shelf setup before you order.
It also does not fit Austin XL, 1000S or 1100 Pro models, which keeps it firmly in the mid size class.
GuardKove 1000D Heavy Duty Grill Cover: Best heavy duty option for 1000 series
- 62 x 24 x 47 in
- 1000D Oxford fabric
- Buckle straps
- Side zipper
A 1000D cover for 1100 Pro, Austin XL 1000, Sportsman 1100 and Navigator 1150 size grills.
Pros
- 1000D fabric in a large size
- Buckles resist wind
- Zipper opening
Cons
- Not for combo grills with side smokers
- Large and stiff when folded
This cover suits large grill owners who want the same 1000D build as the smaller GuardKove. It measures 62 inches wide, 24 inches deep and 47 inches high, and fits 1100 Pro, Austin XL 1000, Rancher XL 1000, Sportsman 1100 and Navigator 1150 models.
The fabric is 1000D high density Oxford cloth with a PVC lining and heat sealed waterproof tape. GuardKove uses UPF 50+ UV resistant fabric and says the cover resists fading for 3 years.
Buckle straps hold the cover in strong wind, and a side zipper makes removal easier than pulling the full length off a tall grill. Those features matter more on a 62 inch wide cover, where the fabric is harder to control.
The trade off is exclusions and bulk. It does not fit triple function combo grills, 1100 models with an attached side smoker, Laredo 1000 or 1600 and 2000 series grills.
The stiff fabric also needs a dedicated storage spot.
SHINESTAR Heavy Duty Grill Cover for Pit: Best for 850 DX owners
- 60 x 27 x 50 in
- PU silver coating
- Double stitched seams
- Adjustable drawstrings
A polyester cover for 820 and 850 models including the 850 DX, with PU coating and drawstrings.
Pros
- Includes the 850 DX
- Double stitched seams
- PU coating sheds water
Cons
- Not for Austin XL or 1100 Pro
- Loose fit on some 1000 models
This cover suits 820 and 850 owners, including the 850 DX. It measures 60 inches long, 27 inches wide and 50 inches high, and fits the 820 Deluxe, PB820PS1, Sportsman 820, Competition 820, Pro Series 850 and Competition 850.
The fabric is high density thickened polyester with a PU silver coating that helps rain bead off. Double stitched seams add tear resistance, and UV resistant fabric helps the cover hold its color in sun.
Adjustable drawstrings on both sides keep the cover in place during storms. That closure is simpler than buckles, so it suits owners who want a fast drape and pull routine.
The trade off is fit range. It does not fit Austin XL, PB820XL or PB850XL, 1000S, 1100 Pro or vertical smokers.
It has a loose fit on some 1000 series models without a side smoker, which means it works best when your grill sits squarely in the 820 and 850 group.
Pit Boss 800 Series Deluxe Grill Cover: Best for 820 Deluxe and Sportsman
- 59.5 x 23.75 x 47.75 in
- Heavy duty polyester with PVC backing
- Drawstring closure
A Pit Boss cover for Mahogany 820 and Sportsman 820 and 850 models, with full length coverage.
Pros
- Cut for 820 Deluxe models
- Full length coverage
- Drawstring closure
Cons
- Narrower depth than some rivals
- No handles or vents stated
This cover suits Mahogany 820 and Sportsman 820 and 850 owners who want a Pit Boss branded option. It measures 59.5 inches wide, 23.75 inches deep and 47.75 inches high.
The build is heavy duty polyester with PVC backing and a drawstring closure. Pit Boss says it gives full length, form fitting coverage and protects against scratching and water spots.
Daily use is plain and predictable. Drape the cover over a cooled grill, pull the drawstring, and rinse it with water when dust builds up.
The 1.8 pound weight keeps it easy to lift and store.
The trade off against newer picks is features. This cover has no stated vents, handles or zipper, and its depth is narrower than the GuardKove and SHINESTAR options.
It wins on brand match for 820 Deluxe models, not on extra features.
Pit Boss pellet grill cover comparison by size
The best Pit Boss pellet grill cover depends on your model group. The 700 class picks run 38 to 44 inches wide, the 820 and 850 picks run 56 to 60 inches wide, and the 1000 class picks run 62 inches wide.
That width gap is why a universal cover usually fits poorly.
| Product | Best for | Size | Material | Closure | Our score |
|---|---|---|---|---|---|
| Pit Boss 73700 Grill Cover for 700FB | 700FB owners | 44 x 29 x 47 in | Polyester and PVC | Drawstring | 9.7 |
| Utheer 73700 600D Grill Cover for Pit | Lexington and 700 models | 42 x 28.5 x 38 in | 600D polyester oxford | Adjustable drawstring straps | 9.6 |
| QuliMetal Grill Cover for Pit Boss Austin | Austin XL and 1000 series | 62 x 24 x 47 in | 600D Oxford fabric | Drawstring | 9.5 |
| Comnova Grill Cover for Pit Boss 700FB | smaller 700 class grills | 38 x 28 x 38 in | 600D Oxford cloth and PU coating | Hook and loop | 9.4 |
| GuardKove 1000D Heavy Duty Grill Cover | heavy duty option for 820 and 850 | 56 x 27 x 50 in | 1000D Oxford fabric | Buckle | 9.2 |
| QuliMetal Grill Cover for Pit Boss 850/820/Z | 820 and 850 with vents | 50 x 56 x 27 in | 600D polyester and PVC coating | Drawstring | 8.9 |
| GuardKove 1000D Heavy Duty Grill Cover | heavy duty option for 1000 series | 62 x 24 x 47 in | 1000D Oxford fabric | Buckle | 8.7 |
| SHINESTAR Heavy Duty Grill Cover for Pit | 850 DX owners | 60 x 27 x 50 in | Thickened polyester | Buckle | 8.4 |
| Pit Boss 800 Series Deluxe Grill Cover | 820 Deluxe and Sportsman | 59.5 x 23.75 x 47.75 in | Polyester with PVC backing | Drawstring | 8.2 |
Fabric choice is the next split. The 600D picks use Oxford polyester with PVC or PU coatings, while the two GuardKove picks use 1000D Oxford fabric.
Heavier fabric resists tears and abrasion better, but it is stiffer to fold.
Closures split the group into three camps. Drawstrings pull the base in, buckles hold straps tighter in wind, and Velcro straps adjust for small size changes.
A zipper, on the GuardKove picks, is the only feature that changes how you remove the cover.
Vents appear on the QuliMetal picks and help in damp climates. Covers without vents rely on you to let the grill cool and dry before covering it.
That habit matters even with a vented cover, so treat vents as help, not as a cure.
How we compared these Pit Boss covers
We compared nine covers by model fit, outside inches, fabric type, coating, closure and extras such as vents, handles, reflective tape and zippers. We checked which Pit Boss model numbers each cover names, because a close sounding name is not a fit guarantee.
We ranked by score using specs, features and buyer feedback against the search for a Pit Boss pellet grill cover. A cover that names more models in its size class scored higher than one that fits a single model, unless the single model cut was exact.
We also weighed trade offs that buyers feel after a few weeks. A zipper saves effort on tall grills.
Handles help on wide covers. Vents help in humid yards.
Buckles help on open patios where wind is a real issue.
We did not test grills by hand, and we do not claim lab results. Where a maker states tear strength, UV life or fade resistance, we report it as the maker's claim.
Use the inches and model lists to make your own fit call.
Which Pit Boss models do these covers fit?
The 700FB group includes the Pit Boss 73700, the Utheer 73700 and the Comnova. Their sizes run from 38 to 44 inches wide, so check height and depth before you assume they swap.
700FB, Lexington and Pro 600 models
The Utheer fits the widest list in this group, including Lexington 500 and 540, Classic 700, Pro 600 and Tailgater. The Comnova fits a similar list at a smaller size.
The Pit Boss 73700 fits the 700FB only.
820, 850 and Sportsman models
The GuardKove 1000D, the QuliMetal 850 and 820 cover, the SHINESTAR and the Pit Boss 800 Series cover all target this class. Widths run from 56 to 60 inches, and heights run from 47.75 to 50 inches.
Austin XL, 1000 and 1100 models
The QuliMetal Austin cover and the larger GuardKove both measure 62 inches wide. Both exclude combo grills with side smokers, so check for attached chambers before you order.
If you own a Z Grills model that shares Pit Boss sizes, our best Z Grills pellet grill covers guide covers that overlap. For the 850 size class alone, our best Pit Boss 850 pellet grill covers guide goes deeper.
What size cover do I need for my Pit Boss grill?
Measure width, depth and height with the grill set up the way you cook. Shelves up or down can change depth by several inches, and a chimney or stack can change height.
How to measure in 2 minutes
Stand in front of the grill and measure from the far left to the far right at the widest point. Then measure front to back, including the handle and any shelf.
Finish with floor to top height.
What if the cover is slightly larger?
A little extra room is fine. A lot of extra room lets the fabric collect water and lift in wind.
Aim for a cover that slides on with light effort and pulls snug at the base.
What if my grill has a side shelf or smoker box?
Fold the shelf down if you can, then measure again. If the shelf stays out, add its full width to your depth or width number.
Covers that say no side tray will not stretch to fit it.
600D vs 1000D fabric: which should you choose?
600D Oxford polyester is the standard in this group. It is waterproof with a PVC or PU coating, light enough to fold, and tough enough for most yards.
The QuliMetal, Utheer and Comnova picks use this level.
1000D fabric is thicker and more tear resistant. The two GuardKove picks use it, and the maker says tear strength is twice that of 600D fabrics.
That matters if your cover rubs on edges, branches or a tight storage corner.
PVC and PU coatings differ in feel. PVC is common and stiff, while PU is softer and more breathable.
The Comnova and SHINESTAR use PU, and both position it as a lighter, more flexible option than PVC.
Choose 600D for a lighter cover you move often. Choose 1000D for a cover that stays on one grill in a rough spot and gets less handling.
Neither choice fixes a wrong size.
Drawstring, buckles or Velcro: which closure holds best?
A drawstring closure is the most common option here. It is fast to use and pulls the base in, but it needs a firm pull to hold in strong wind.
The Pit Boss, Utheer, QuliMetal and SHINESTAR picks use this style.
Buckle straps hold tighter than a drawstring. The GuardKove picks use buckles on both sides, which helps on open patios.
You trade a few extra seconds of work for better wind resistance.
Velcro straps adjust across a wider size range. The Comnova uses hook and loop straps on each side, which helps when a shelf adds a little width.
Velcro can wear over time, so keep the straps clean and press them flat.
A side zipper is a separate win. It lets you open the cover instead of pulling the full length off a tall grill.
Only the GuardKove picks in this group offer it, and it helps most on 820 and 850 size grills.
Do you need vents, handles or reflective tape?
Vents help air move under a cover in humid weather. The QuliMetal Austin and 850 picks include ventilation ports or vents.
That helps reduce condensation on metal parts between cooks.
Handles help you lift and store a wide cover. The Utheer and QuliMetal 850 picks include side handles.
On a 56 to 62 inch wide cover, that help is real, especially after rain adds weight.
Reflective tape helps you find the grill at night and adds visibility in a dark yard. The Utheer and QuliMetal 850 picks include it.
It is a small feature, but it costs you nothing in daily use.
If your pick has none of these extras, keep your routine simple. Let the grill cool fully, cover it dry, and store the cover in a dry place when the grill is in use.
How do I keep a pellet grill cover in good shape?
Rinse the cover with water to remove dust, pollen and grit. Wipe it with a cloth, then let it air dry fully before you store it or put it back on.
That habit protects the coating and seams.
Do not machine wash a cover unless the maker states it is safe. High heat and agitation can damage coatings and stitching.
Most covers in this group are rinse and air dry designs.
Store the cover dry when the grill is in use. A cover left folded on damp ground can hold moisture against the fabric.
Hang it by its handles, if it has them, or store it in a bin.
Pair a cover with basic care tools, and our bbq cleaning tools guide helps you choose brushes and scrapers that will not fight your cover routine. A clean grill under a cover stays cleaner for the next cook.
For a wider view of pellet smoker protection, our best smoker cover for pellet smokers guide compares Universal and model specific designs. Our general best smoker cover guide covers vertical and offset smokers too.
If you want the broader Pit Boss line beyond pellet models, our best Pit Boss smoker covers guide covers that range. And if your grill is a Traeger that shares similar sizes, our best Traeger pellet grill covers guide covers that fit overlap.
Verdict: which Pit Boss pellet grill cover should you buy?
Pick the Pit Boss 73700 if you own a 700FB and want the exact brand cut. Pick the Utheer if you own a Lexington, Classic 700, Pro 600 or Tailgater and want reflective tape and handles.
Pick the Comnova if your 700 class grill is compact and you prefer a PU coating.
Pick the GuardKove 1000D for 820 and 850 models if you want heavy fabric, buckles and a zipper. Pick the QuliMetal 850 and 820 cover if you want vents and handles at a 600D level.
Pick the SHINESTAR if you own an 850 DX. Pick the Pit Boss 800 Series cover if you want the brand option for 820 Deluxe and Sportsman models.
Pick the QuliMetal Austin cover or the larger GuardKove if you own an Austin XL, Rancher XL 1000, 1100 Pro or a 1000 series grill. Check the exclusion list for combo grills and side smokers before you order either one.
Measure your grill, match the model list, then choose fabric and closure for your yard. That order will get you the best Pit Boss pellet grill cover for your setup, and it will keep rain, sun and wind from doing slow damage between cooks.
Our top 3 picks at a glance
-
1
-
2
Best for Lexington and 700 modelsUtheer 73700 600D Grill Cover for Pit
9.6/10 our score
See it on Amazon -
3
Best for Austin XL and 1000 seriesQuliMetal Grill Cover for Pit Boss Austin
9.5/10 our score
See it on Amazon
Frequently asked questions
How do I know which Pit Boss cover size I need?
Match the cover to your exact model first, then check the outside inches. A 700FB cover will not fit an 850 or an Austin XL, even when the names sound close.
Measure width, depth and height with shelves folded or extended, whichever way you cook.
Can I use a larger cover on a smaller grill?
You can, but a loose cover collects water and moves in wind. A close fit sheds rain better and stays in place.
Choose the smallest cover that still slides on without forcing the seams.
Do I need vents on a pellet grill cover?
Vents help air move under the cover and reduce trapped moisture. That matters most when a grill sits outside through rain and humidity.
If your pick has no vents, let the grill cool fully and dry before covering it.
How should I clean a pellet grill cover?
Rinse the cover with water and wipe off dust and pollen. Let it air dry fully before you put it back on.
Do not machine wash unless the maker states it is safe, and store it dry when not in use.
When should I cover a pellet grill?
Cover it only after the grill has cooled. Fabric covers can be damaged by heat and trapped grease.
Wait at least 10 to 15 minutes after a cook, or longer after a hot burn, before you drape the cover over the grill.
About this guide: Our look at Pit Boss pellet grill covers draws on maker specs, materials and what owners report. See how we research.



