Best picks

9 Best Covers for Z Grills Pellet Grills (November 2026)

Updated on · By the BBQ Smokers Review team

The best Z Grills pellet grill covers include the Comnova Grill Cover for Traeger Pro for Z Grills 550B owners, the Comnova Grill Cover for Pit Boss 820-850 for Z Grills 700 series, and the ZBXFCSH Heavy Duty Replacement Grill Cover Compatible for Z Grills 600 series replacement.

On this page (9 sections)
  1. The best Z Grills pellet grill covers for each model
  2. How the best Z Grills pellet grill covers compare
  3. How we compared these Z Grills covers
  4. What size Z Grills pellet grill cover do you need?
  5. PU coating or PVC lining: which is better for a Z Grills cover?
  6. Which closure keeps a Z Grills cover in place in wind?
  7. How do you clean and store a Z Grills pellet grill cover?
  8. Which Z Grills series does each cover fit?
  9. Verdict: which Z Grills pellet grill cover should you buy?

The best Z Grills pellet grill cover for most owners is the Comnova Grill Cover for Traeger Pro, because it fits the Z Grills 550B and uses 600D Oxford cloth with a PU coating. Our score weighs specs, features and buyer feedback against what you are shopping for.

If you own a 600, 700 or 1000 series model, start with the model specific picks below.

A good cover does more than hide dust. It shields the paint, the hopper and the control area from rain, snow, sun and road grit.

It also slows the kind of surface wear that shortens the life of a grill kept outdoors all year.

Measure your grill before you buy any Z Grills pellet grill cover. Width matters most, but depth and height decide whether a cover class will clear the hopper, chimney, side shelf and lid handle.

A cover that is too tight can stress the seams, and a cover that is too loose can flap in wind and collect water.

Our picks at a glance

  1. 1 Comnova Grill Cover for Traeger Pro
    Best for Z Grills 550B owners

    Comnova Grill Cover for Traeger Pro

    9.7/10 our score

    See it on Amazon
  2. 2 Comnova Grill Cover for Pit Boss 820-850
    Best for Z Grills 700 series

    Comnova Grill Cover for Pit Boss 820-850

    9.6/10 our score

    See it on Amazon
  3. 3 ZBXFCSH Heavy Duty Replacement Grill Cover Compatible
    Best for Z Grills 600 series replacement

    ZBXFCSH Heavy Duty Replacement Grill Cover Compatible

    9.5/10 our score

    See it on Amazon
  1. 4ZBXFCSH Heavy Duty Replacement Grill Cover CompatibleCheck it
  2. 5Z GRILLS Pellet Grill Cover 49 Inch

    Z GRILLS Pellet Grill Cover 49 Inch

    Best official fit for 450 and 550 models
    Check it
  3. 6Z GRILLS Pellet Grill Cover 54 Inch

    Z GRILLS Pellet Grill Cover 54 Inch

    Best official fit for 600 series
    Check it
  4. 7Jungda Tabletop Grill Cover for Z Grills

    Jungda Tabletop Grill Cover for Z Grills

    Best for Z Grills Cruiser 200A
    Check it
  5. 8TURLIOARN Pellet Grill Cover for Z Grill

    TURLIOARN Pellet Grill Cover for Z Grill

    Best value for ZPG-450A and 550B
    Check it
  6. 9GuardKove 1000D Heavy Duty Grill Cover

    GuardKove 1000D Heavy Duty Grill Cover

    Best heavy fabric for 700 and 600 series
    Check it

The best Z Grills pellet grill covers for each model

The Comnova 550B pick leads for its balance of size, material and fit. The model specific ZBXFCSH and Z Grills covers follow, because a named fit helps when your grill has a wide hopper or a tall lid.

1

Comnova Grill Cover for Traeger Pro: Best for Z Grills 550B owners

Comnova Grill Cover for Traeger Pro, Z Grills pellet grill covers
9.7/10Our score
  • 41L x 22W x 39H in
  • 600D Oxford cloth with PU coating
  • Adjustable hook and loop sides
  • UV resistant coating

A midsize 600D cover that fits the Z Grills 550B and tightens at the sides for a snugger shape.

See it on Amazon

Pros

  • Fits Z Grills 550B
  • PU coating is softer than PVC
  • Adjustable sides help hold shape in wind

Cons

  • Too small for 600, 700 and 1000 series
  • Only for grills under 41 in wide

This Comnova cover suits owners of the Z Grills 550B who want a midsize cover without buying an official Z Grills cover. It measures 41 in wide by 22 in deep by 39 in high, so it covers a midsize pellet grill body with room for the lid and hopper.

The fabric is 600D Oxford cloth with a waterproof PU coating and a UV resistant coating. Comnova says PU is softer and more breathable than PVC, which can make the cover easier to fold and less prone to stiffness in cold weather.

Adjustable hook and loop bands on each side help pull the fabric in. That helps in wind, because a loose cover can lift and flap against the paint.

It also helps owners whose grill sits just under the listed size.

The trade off is size range. This cover is only for grills under 41 in wide, so it will not fit 600, 700 or 1000 series models.

Comnova also advises waiting 10 to 15 minutes for the smoker to cool before you cover it.

Comnova Grill Cover for Traeger ProCheck it on Amazon
2

Comnova Grill Cover for Pit Boss 820-850: Best for Z Grills 700 series

Comnova Grill Cover for Pit Boss 820-850, Z Grills pellet grill covers
9.6/10Our score
  • 56L x 27W x 46H in
  • 600D Oxford cloth with PU coating
  • Adjustable hook and loop sides
  • UV resistant coating

A large 600D cover sized for the Z Grills 700 series, with side straps to pull the fabric in.

See it on Amazon

Pros

  • Fits Z Grills 700 series
  • Large footprint for taller hoppers
  • PU coating resists weather exposure

Cons

  • Too large for 450 and 550 models
  • Check hopper and shelf width before ordering

This Comnova cover suits owners of the Z Grills 700 series who need a larger footprint. It measures 56 in wide by 27 in deep by 46 in high, which gives more room for a taller hopper and a wider side shelf than the 41 in Comnova cover.

The fabric is 600D Oxford cloth with a waterproof PU coating and a UV resistant coating. Comnova says the PU coating is softer and more breathable than PVC.

That can matter on a large cover, because a stiff cover is harder to pull over a tall grill.

Adjustable hook and loop bands on each side help tighten the fit. That helps when your 700 series grill has a shelf or chimney shape that leaves extra fabric at the sides.

The trade off is that this size is too large for 450 and 550 models. Extra fabric can collect water in the folds and flap in wind.

Measure your grill carefully before ordering, including the hopper width.

Comnova Grill Cover for Pit Boss 820-850Check it on Amazon
3

ZBXFCSH Heavy Duty Replacement Grill Cover Compatible: Best for Z Grills 600 series replacement

ZBXFCSH Heavy Duty Replacement Grill Cover Compatible, Z Grills pellet grill covers
9.5/10Our score
  • Made for Z Grills 600 series models
  • 600D Oxford fabric with PVC lining
  • Buckle closure
  • Water resistant polyester

A model specific replacement cover for 600 series grills, with a PVC lined interior and buckle closure.

See it on Amazon

Pros

  • Named fit for 600 series models
  • PVC lining helps block moisture
  • Buckles help secure the cover

Cons

  • PVC lining can feel stiffer than PU
  • No stated overall dimensions in the data

This ZBXFCSH cover suits owners of Z Grills 600 series models who want a replacement cover named for their exact series. It lists fit for the 600D, 6002B, L6002E, 600D3E and 6002B2 models.

The fabric is 600D Oxford fabric with a PVC lining. The PVC lined interior helps block moisture, and ZBXFCSH says the polyester resists water, rain, snow and dirt.

A buckle closure helps secure the cover at the base.

The model specific shape is the main benefit here. A cover cut for the 600 series should follow the hopper and body shape more closely than a generic large cover.

The trade off is construction. PVC lining can feel stiffer than the PU coating on the Comnova covers.

That stiffness can make the cover harder to fold for storage, especially in cold weather.

ZBXFCSH Heavy Duty Replacement Grill Cover CompatibleCheck it on Amazon
4

ZBXFCSH Heavy Duty Replacement Grill Cover Compatible: Best for Z Grills 1000 series

ZBXFCSH Heavy Duty Replacement Grill Cover Compatible, Z Grills pellet grill covers
9.3/10Our score
  • Made for Z Grills 1000 series
  • 600D Oxford fabric with PVC lining
  • Buckle closure
  • Water resistant polyester

A replacement cover made for the larger 1000 series, with the same 600D and PVC construction as the 600 series version.

See it on Amazon

Pros

  • Named fit for 1000 series
  • Buckle closure for windy days
  • PVC lining helps repel water

Cons

  • Too large for smaller Z Grills models
  • PVC lining can feel stiffer than PU

This ZBXFCSH cover suits owners of the Z Grills 1000 series, including the 1000D and 10002B models. It is the largest model specific option in this group, because the 1000 series has a longer body than the 600 series.

The fabric is 600D Oxford fabric with a PVC lining. ZBXFCSH says the rugged polyester resists water, rain, snow and dirt.

The PVC lined interior helps keep moisture from soaking through.

A buckle closure helps hold the cover in place. That matters on a large grill, because a long cover has more surface area for wind to catch.

The trade off is scope. This cover is made for the 1000 series only, so it will not fit smaller Z Grills models.

The PVC lining can also feel stiffer than PU coated covers.

ZBXFCSH Heavy Duty Replacement Grill Cover CompatibleCheck it on Amazon
5

Z GRILLS Pellet Grill Cover 49 Inch: Best official fit for 450 and 550 models

Z GRILLS Pellet Grill Cover 49 Inch, Z Grills pellet grill covers
9.1/10Our score
  • 51.2L x 22.5W x 48.4H in
  • 600D polyester with PVC coating
  • Hook and eye closure
  • UV and fade resistant

The official Z Grills cover for 450 series and 550B2 and 550B4 models, with extra length for a full cover.

See it on Amazon

Pros

  • Official Z Grills fit
  • Full length coverage
  • Fade resistant fabric

Cons

  • Excludes 550A, 550B and 550C
  • PVC coating can feel stiffer

This official Z Grills cover suits owners of the 450 series, 550B2 and 550B4 models. It measures 51.2 in long by 22.5 in wide by 48.4 in high, so it is longer than the Comnova 41 in cover even though both serve midsize grills.

The fabric is upgraded 600D polyester with a water resistant PVC coating and a water repellent finish. Z Grills says the fabric resists wear and tear, sun, rain, sleet and snow.

The fabric also uses UV resistant and fade resistant treatment. That helps keep a black cover looking black after months of sun exposure, which matters if your grill lives in full sun.

The trade off is model limits. This cover excludes the 550A, 550B and 550C.

Z Grills also advises letting the grill cool completely before covering it, and the PVC coating can feel stiffer than PU.

Z GRILLS Pellet Grill Cover 49 InchCheck it on Amazon
6

Z GRILLS Pellet Grill Cover 54 Inch: Best official fit for 600 series

Z GRILLS Pellet Grill Cover 54 Inch, Z Grills pellet grill covers
8.9/10Our score
  • 54 in labeled size
  • 600D polyester with PVC coating
  • Hook and eye closure
  • UV and fade resistant

The official Z Grills full length cover for 600 series pellet smokers, built to drape over the full body.

See it on Amazon

Pros

  • Official Z Grills fit for 600 series
  • Full length design
  • Fade resistant fabric

Cons

  • Too large for 450 and 550 models
  • Measure shelves and hopper before ordering

This official Z Grills cover suits owners of the 600 series pellet smoker. It is sold as the 54 Inch full length cover, which gives it more length than the 49 Inch cover for 450 and newer 550 models.

The fabric is upgraded 600D polyester with a water resistant PVC coating and a water repellent finish. Z Grills says the cover resists wear and tear and shields the grill from sun, rain, sleet and snow.

UV resistant and fade resistant fabric helps the cover hold its color over time. That is useful for a full length cover, because a faded cover often signals that the fabric has taken a lot of sun.

The trade off is fit range. This cover is made for the 600 series, so it will be too large for 450 and 550 models.

Measure shelves and the hopper before ordering, because a full length cover needs clearance at both ends.

Z GRILLS Pellet Grill Cover 54 InchCheck it on Amazon
7

Jungda Tabletop Grill Cover for Z Grills: Best for Z Grills Cruiser 200A

Jungda Tabletop Grill Cover for Z Grills, Z Grills pellet grill covers
8.6/10Our score
  • 25L x 20W x 13H in
  • 600D Oxford fabric
  • Drawstring closure
  • Water resistant

A small drawstring cover made for the Z Grills Cruiser 200A tabletop pellet grill.

See it on Amazon

Pros

  • Exact tabletop size
  • Drawstring pulls snug at the base
  • Light and easy to store

Cons

  • Fits tabletop models only
  • Too small for full size Z Grills

This Jungda cover suits owners of the Z Grills Cruiser 200A portable pellet grill. It measures 25 in long by 20 in wide by 13 in high, which is far smaller than any full size cover in this guide.

The fabric is 600D Oxford fabric with high density stitching. Jungda says the material resists tearing and water, and shields the grill from rain, snow, dust and UV rays.

An adjustable bottom drawstring helps pull the cover snug. That helps on a tabletop grill, because a small cover can shift more easily in wind than a full size cover.

The trade off is scope. This cover fits tabletop models of similar size only.

It will not cover a full size Z Grills pellet smoker, and it is not a substitute for the larger covers above.

Jungda Tabletop Grill Cover for Z GrillsCheck it on Amazon
8

TURLIOARN Pellet Grill Cover for Z Grill: Best value for ZPG-450A and 550B

TURLIOARN Pellet Grill Cover for Z Grill, Z Grills pellet grill covers
8.4/10Our score
  • 49L x 28W x 45H in
  • 600D ripstop Oxford with PVC coating
  • Hook and loop straps
  • UV resistant

A 49 in cover that fits the ZPG-450A and ZPG-550B, and also lists fit for the ZPG-700D series.

See it on Amazon

Pros

  • Fits 450A and 550B
  • Deep 45 in height
  • Side straps help in wind

Cons

  • One size must serve several models
  • PVC coating can feel heavier

This TURLIOARN cover suits owners of the ZPG-450A and ZPG-550B, and it also lists fit for the ZPG-700D series. It measures 49 in long by 28 in wide by 45 in high, which is deeper than several other midsize covers.

The fabric is 600D ripstop Oxford with a thick PVC coating. TURLIOARN says the coating is waterproof and the doubled stitching helps prevent leaks.

The ripstop weave helps resist tearing.

Hook and loop straps on the side help secure the cover in place. Large handle loops also make the cover easier to lift on and off a tall grill.

The trade off is that one size must serve several models. The deep 45 in height may leave extra fabric on a shorter 450A, which can collect water in folds.

The PVC coating can also feel heavier than PU.

TURLIOARN Pellet Grill Cover for Z GrillCheck it on Amazon
9

GuardKove 1000D Heavy Duty Grill Cover: Best heavy fabric for 700 and 600 series

GuardKove 1000D Heavy Duty Grill Cover, Z Grills pellet grill covers
8.2/10Our score
  • 53W x 22D x 40H in
  • 1000D Oxford fabric
  • Buckle straps and side zipper
  • UPF 50+ fabric

A 1000D cover that fits Z Grills 700, 600 and 550 models, with buckles and a side zipper for easier removal.

See it on Amazon

Pros

  • Thicker 1000D fabric
  • Zipper eases removal
  • Fits several Z Grills sizes

Cons

  • Not for 550A or 450 models
  • Narrower depth may limit shelf fit

This GuardKove cover suits owners of Z Grills 700, 600 and 550 models who want a thicker fabric. It measures 53 in wide by 22 in deep by 40 in high, which sits between the midsize and large covers in this guide.

The fabric is 1000D Oxford cloth, which is thicker than the 600D fabric used by most other picks. GuardKove says tear strength is improved compared with 420D, 600D and 900D materials.

The cover uses a triple waterproof design with a waterproof outer layer, a PVC lining and heat sealed waterproof tape. That helps block rain and snow at the seams, where water often enters first.

Adjustable buckle straps on both sides help hold the cover in wind. A side zipper also makes removal easier, because you do not need to pull the whole cover off from the top.

The trade off is fit limits. GuardKove says this cover is not for the Z Grills 550A or 450 models.

The 22 in depth is also narrower than some other covers, so check your shelf depth before ordering.

GuardKove 1000D Heavy Duty Grill CoverCheck it on Amazon

How the best Z Grills pellet grill covers compare

The Comnova 41 in cover leads for the 550B because it pairs a named fit with a PU coating and adjustable sides. The Comnova 56 in cover does the same job for the 700 series at a larger size.

Model specific covers from ZBXFCSH and Z Grills follow that logic for the 600 and 1000 series. The GuardKove cover stands apart with 1000D fabric, while the Jungda cover serves only tabletop grills.

ProductBest forSize (L x W x H)MaterialClosureOur score
Comnova Grill Cover for Traeger ProZ Grills 550B owners41 x 22 x 39 in600D Oxford cloth with PU coatingHook and loop9.7
Comnova Grill Cover for Pit Boss 820-850Z Grills 700 series56 x 27 x 46 in600D Oxford cloth with PU coatingHook and loop9.6
ZBXFCSH Heavy Duty Replacement Grill Cover CompatibleZ Grills 600 series replacement600D Oxford fabric with PVC liningBuckle9.5
ZBXFCSH Heavy Duty Replacement Grill Cover CompatibleZ Grills 1000 series600D Oxford fabric with PVC liningBuckle9.3
Z GRILLS Pellet Grill Cover 49 Inchofficial fit for 450 and 550 models51.2 x 22.5 x 48.4 in600D polyester fabricHook and eye9.1
Z GRILLS Pellet Grill Cover 54 Inchofficial fit for 600 series600D polyester fabricHook and eye8.9
Jungda Tabletop Grill Cover for Z GrillsZ Grills Cruiser 200A25 x 20 x 13 in600D Oxford fabricDrawstring8.6
TURLIOARN Pellet Grill Cover for Z Grillvalue for ZPG-450A and 550B49 x 28 x 45 in600D ripstop Oxford fabricHook and loop8.4
GuardKove 1000D Heavy Duty Grill Coverheavy fabric for 700 and 600 series1000D Oxford fabricBuckle8.2

How we compared these Z Grills covers

We compared each cover by model fit, overall dimensions, fabric type, coating and closure type. A cover that names your exact Z Grills series scored higher than a cover that only lists a similar size.

We also looked at how each cover handles wind, water and sun. PU and PVC coatings both block water, but they feel different in daily use.

Buckles, hook and loop straps and drawstrings each secure the cover in a different way.

For sizing, we checked the stated length, width, depth and height against the models each cover lists. Where a cover uses a shared size for several models, we treated that as a trade off, because extra fabric can collect water.

We did not test these covers hands on. We checked the specs, compared the stated dimensions and looked at buyer patterns to decide which covers fit which Z Grills models best.

What size Z Grills pellet grill cover do you need?

The right size is the one that clears your grill with a little extra fabric, not a lot. Measure from the longest end to the other end, then measure depth and height with the lid closed.

Include the hopper, chimney, side shelf and front shelf in your measurements. Those parts often decide the depth you need, even when the main body seems smaller.

How to measure width, depth and height

Measure width across the longest part of the grill, including any side shelf that stays attached. Measure depth from front to back, including the hopper and handle.

Measure height from the ground to the tallest point, usually the chimney or lid handle. Add 1 to 2 in of extra room so the cover does not pull tight at the seams.

What happens if the cover is too large or too small

A cover that is too large can flap in wind, collect water in folds and wear faster at the corners. A cover that is too small can stress seams and leave the hopper or shelf exposed.

Choose the size that matches your model first, then check each dimension. That order helps you avoid a cover that fits the width but fails on depth or height.

PU coating or PVC lining: which is better for a Z Grills cover?

PU coated covers tend to feel softer and more flexible than PVC lined covers. Comnova says its PU coating is more breathable than PVC and less prone to stiffness.

PVC lined covers, such as the ZBXFCSH and Z Grills options, still block water well. The trade off is a stiffer feel, especially when you fold the cover for storage in cold weather.

When PU is the better choice

Choose PU if you remove and store the cover often. A softer cover is easier to fold, easier to pull over a tall hopper and easier to hang to dry.

When PVC lining is the better choice

Choose PVC lining if you want a model specific cover with a lining that helps block moisture at the seams. The ZBXFCSH covers use this design for the 600 and 1000 series.

Which closure keeps a Z Grills cover in place in wind?

No closure can fix a cover that is far too large for your grill. Still, the right closure helps a well sized cover stay put on windy days.

Hook and loop straps, such as those on the Comnova and TURLIOARN covers, let you pull the sides in. Buckles, such as those on the ZBXFCSH and GuardKove covers, give a firmer hold at the base.

Drawstrings and hook and eye closures

The Jungda tabletop cover uses a drawstring that pulls snug at the base. The official Z Grills covers use hook and eye closures.

Each closure works best when the cover size is close to your grill size. Measure first, then use the closure to fine tune the fit.

How do you clean and store a Z Grills pellet grill cover?

Most covers in this guide can be cleaned with water and a soft brush or cloth. Comnova advises rinsing with water, wiping lightly to remove water stains and drying in the sun for next use.

Z Grills advises hosing down its covers with water to remove dirt and debris, then air drying in the sun. Jungda gives similar care advice for its tabletop cover.

Store the cover dry and folded, not bunched in a damp corner. Let the grill cool completely before covering, as Z Grills advises, or wait 10 to 15 minutes, as Comnova advises.

If you also own other pellet grills, our best Traeger pellet grill cover guide can help you size a cover for those models too. For a broader look at pellet smoker covers, see our best smoker cover for pellet smokers guide.

Which Z Grills series does each cover fit?

The 450 and 550 models need a midsize cover, but the exact suffix matters. The official Z Grills 49 Inch cover fits the 450 series and 550B2 and 550B4, but excludes the 550A, 550B and 550C.

The Comnova 41 in cover fits the 550B, while the TURLIOARN 49 in cover fits the ZPG-450A and ZPG-550B. Check your full model number before you choose between them.

600, 700 and 1000 series fit

The official Z Grills 54 Inch cover and the ZBXFCSH cover fit the 600 series. The Comnova 56 in cover fits the 700 series, and the ZBXFCSH cover fits the 1000 series.

The GuardKove 53 in cover lists fit for the 700, 600 and 550 series, but not the 550A or 450. That makes it a useful option when you want thicker fabric across several sizes.

If you own a Pit Boss grill as well, our best Pit Boss smoker cover guide covers that brand. Our best Pit Boss 850 pellet grill cover guide also helps with that larger Pit Boss model.

Verdict: which Z Grills pellet grill cover should you buy?

Pick the Comnova 41 in cover if you own a Z Grills 550B and want a balanced midsize option. Pick the official Z Grills 49 Inch cover if you own a 450 series, 550B2 or 550B4 and want the official fit.

Pick the Comnova 56 in cover for a 700 series grill, the ZBXFCSH cover for a 600 or 1000 series grill, and the GuardKove cover if you want 1000D fabric. Pick the Jungda cover only for the Cruiser 200A tabletop model.

Measure your grill first, then match the cover to your exact series. For more sizing help, see our best smoker cover guide and our bbq cleaning tools guide for cover care.

If you also cook on Camp Chef gear, our best Camp Chef smoker cover guide covers those models.

Our top 3 picks at a glance

  1. 1 Comnova Grill Cover for Traeger Pro
    Best for Z Grills 550B owners

    Comnova Grill Cover for Traeger Pro

    9.7/10 our score

    See it on Amazon
  2. 2 Comnova Grill Cover for Pit Boss 820-850
    Best for Z Grills 700 series

    Comnova Grill Cover for Pit Boss 820-850

    9.6/10 our score

    See it on Amazon
  3. 3 ZBXFCSH Heavy Duty Replacement Grill Cover Compatible
    Best for Z Grills 600 series replacement

    ZBXFCSH Heavy Duty Replacement Grill Cover Compatible

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What size cover fits a Z Grills 550B?

The Comnova 41 by 22 by 39 in cover lists fit for the Z Grills 550B. The official Z Grills 49 Inch cover excludes the 550B, so check the exact model suffix before you buy.

Measure width, depth and height with the hopper and shelves in place.

Which cover fits a Z Grills 600 series?

The official Z Grills 54 Inch cover and the ZBXFCSH 600 series replacement both name the 600 series. The GuardKove 53 by 22 by 40 in cover also lists the 600 series.

Measure your grill first because shelves and hoppers change the needed depth.

Can one cover fit several Z Grills models?

Some covers list several models, such as the TURLIOARN 49 by 28 by 45 in cover for the ZPG-450A, ZPG-550B and ZPG-700D series. A shared size works only when the overall shape is close.

Compare each dimension to your grill before you order.

Do I need to let a pellet grill cool before covering it?

Yes. Comnova advises waiting 10 to 15 minutes to cool down the smoker before covering.

Z Grills advises letting the grill cool completely before covering.

A cool grill protects the fabric and reduces heat buildup under the cover.

Are PU and PVC coatings different on grill covers?

Comnova uses a PU coating and says it is softer and more breathable than PVC. The ZBXFCSH and Z Grills covers use PVC lining or coating.

PU often feels more flexible, while PVC lined covers can feel stiffer but still block water well.