Best picks

9 Best Insulated Smoker Blankets (November 2026)

Updated on · By the BBQ Smokers Review team

The best insulated smoker blankets include the Utheer Grill Thermal Insulated Blanket for Pit for Pit Boss vertical smokers, the Utheer Thermal Insulated Blanket for Pit Boss for Pit Boss 820 and 850 grills, and the Matace Welding Blanket Fireproof 40x40 Inch (best cut-to-fit carbon felt option).

On this page (8 sections)
  1. The best insulated smoker blankets, by grill and fit
  2. Insulated smoker blanket comparison: fit, size and material
  3. How we compared these insulated smoker blankets
  4. Does an insulated smoker blanket really save pellets?
  5. What size insulated smoker blanket do I need?
  6. Is it safe to use an insulated smoker blanket in winter?
  7. How do you install and care for an insulated smoker blanket?
  8. Which insulated smoker blanket is best for your grill?

The best insulated smoker blanket for most pellet grill owners is the Utheer for Pit Boss vertical smokers, because it is cut for those models and helps hold heat in winter.

If you own a Traeger, a Traeger-specific fit will work better than a general blanket.

If your grill has no fitted option, a cut-to-fit carbon felt blanket can fill the gap.

An insulated blanket does not make a smoker run hotter on its own.

It slows heat loss through the barrel, so the grill needs less fuel to hold a set temperature on a cold, windy day.

That matters most for low-and-slow cooks, where a steady temperature saves time and pellets.

Our score weighs specs, features and buyer feedback against what you are shopping for.

We compared fit, materials, heat ratings, size, attachment methods and weather resistance across these 9 picks.

Our picks at a glance

  1. 1 Utheer Grill Thermal Insulated Blanket for Pit
    Best for Pit Boss vertical smokers

    Utheer Grill Thermal Insulated Blanket for Pit

    9.7/10 our score

    See it on Amazon
  2. 2 Utheer Thermal Insulated Blanket for Pit Boss
    Best for Pit Boss 820 and 850 grills

    Utheer Thermal Insulated Blanket for Pit Boss

    9.6/10 our score

    See it on Amazon
  3. 3 Matace Welding Blanket Fireproof 40x40 Inch
    Best cut-to-fit carbon felt option

    Matace Welding Blanket Fireproof 40x40 Inch

    9.5/10 our score

    See it on Amazon
  1. 4Grisun Insulated Smoker Blanket for TraegerCheck it
  2. 5Unidanho Grill Insulated Blanket for Traeger ProCheck it
  3. 6kanhiro Fiberglass Welding Blanket 4x6 ft

    kanhiro Fiberglass Welding Blanket 4x6 ft

    Best large fiberglass blanket
    Check it
  4. 7PAWBOSE PWABOSE Thermal Blanket for Grill

    PAWBOSE PWABOSE Thermal Blanket for Grill

    Best cuttable blanket for mixed grills
    Check it
  5. 8FlameDuty Insulation Blanket for Pit Boss Lexington/Sportsman/NavigatorCheck it
  6. 9SUNICO Smoker Insulation Blanket

    SUNICO Smoker Insulation Blanket

    Best fiberglass-free cut-to-fit blanket
    Check it

The best insulated smoker blankets, by grill and fit

The top picks are model-specific blankets for Pit Boss and Traeger grills, because fit is the main factor in winter performance.

Cut-to-fit and welding-style blankets rank lower here because they need more work to stay in place.

1

Utheer Grill Thermal Insulated Blanket for Pit: Best for Pit Boss vertical smokers

Utheer Grill Thermal Insulated Blanket for Pit, insulated smoker blankets
9.7/10Our score
  • Fits Pit Boss Pro Series II 4-Series PBV4PS2
  • Fits PBV4PS1, PBV4NX, PBV5PW1 and PBV5P1
  • Fire-resistant fiberglass blanket
  • Heat-resistant magnets and Velcro structure
  • Snow, water and wind resistant

A fitted blanket for Pit Boss vertical pellet smokers, with magnets and Velcro so you can open the door while it stays in place.

See it on Amazon

Pros

  • Model-specific fit for vertical Pit Boss smokers
  • Magnets help it stay attached
  • Velcro lets you open the door

Cons

  • Only suits the listed vertical models
  • Confirm your exact model before ordering

Utheer suits Pit Boss vertical smoker owners who cook through winter.

It fits the Pro Series II 4-Series PBV4PS2, the PBV4PS1, the PBV4NX, the 5-Series PBV5PW1 and the PBV5P1.

Heat-resistant magnets hold the blanket against the smoker, and a Velcro structure lets you open the door without removing it.

Utheer says the fire-resistant fiberglass layers reduce fuel use in cold outdoor temperatures.

The outer layer is snow, water and wind resistant.

The trade-off is narrow fit.

This blanket will not suit a horizontal Pit Boss barrel, even if the inches look close.

Confirm your exact model number before you order.

Utheer Grill Thermal Insulated Blanket for PitCheck it on Amazon
2

Utheer Thermal Insulated Blanket for Pit Boss: Best for Pit Boss 820 and 850 grills

Utheer Thermal Insulated Blanket for Pit Boss, insulated smoker blankets
9.6/10Our score
  • Fits Pit Boss 820 Deluxe and Pro 850 series
  • Fits PB850PS2, PB820D, 820FB and more
  • Also fits Z Grill 700 series
  • Heat-resistant magnets
  • Fire-resistant fiberglass blanket

A broad-fit blanket for Pit Boss 820 and 850 pellet grills, with magnets to hold it against the barrel in cold weather.

See it on Amazon

Pros

  • Covers many Pit Boss 800 series models
  • Also fits Z Grill 700 series
  • Magnetic attachment

Cons

  • Check grill dimensions before ordering
  • Not a universal barrel shape

Utheer suits Pit Boss 820 and 850 owners, plus Z Grill 700 owners with a similar barrel size.

It fits the 820 Deluxe, Pro 850 series, PB850PS2, PB820D, 820FB, 820D3, 820SC, 820XL, 820PS1, Competition 850, Competition 820CS1 and Sportsman 820.

It also fits Pit Boss 800 Series grills with chimney exhaust or back venting.

Built-in heat-resistant magnets secure the blanket to the grill.

Utheer says the three heat-resistant materials act as a buffer between the elements and the grill.

The outer layer resists snow, water and wind, which helps in exposed winter cooking spots.

The trade-off is that you must check dimensions carefully.

If your grill is a vertical Pit Boss, the first Utheer pick is a closer match.

Utheer Thermal Insulated Blanket for Pit BossCheck it on Amazon
3

Matace Welding Blanket Fireproof 40x40 Inch: Best cut-to-fit carbon felt option

Matace Welding Blanket Fireproof 40x40 Inch, insulated smoker blankets
9.5/10Our score
  • 40 x 40 inches
  • 5mm carbon felt
  • 100% carbon felt construction
  • Flexible and cut-to-fit
  • 1.2 pounds

A 40 x 40 inch carbon felt blanket you can cut or fold to fit, better as a DIY heat shield than a fitted smoker blanket.

See it on Amazon

Pros

  • Thick 5mm carbon felt
  • Cut-to-fit flexibility
  • Light at 1.2 pounds

Cons

  • No smoker-specific fit or straps
  • Needs careful placement for smoking use

Matace suits a practical owner who wants a thick, flexible heat shield rather than a fitted cover.

It measures 40 x 40 inches and is made of 5mm carbon felt.

That thickness gives it more substance than thin foil-style blankets, and it can be trimmed for custom fitting.

Carbon felt is flexible and foldable, so you can drape it over a barrel or fold it to cover a section.

Matace says it is tested to ASTM D6413 standards and designed to manage sparks, hot slag and radiant heat in welding work.

The trade-off is attachment.

There are no magnets, hooks or straps, so wind can move it.

Matace also notes the blanket shields against flames below 1800 F.

Use it as a flexible layer, not as a direct replacement for a fitted smoker blanket.

Matace Welding Blanket Fireproof 40x40 InchCheck it on Amazon
4

Grisun Insulated Smoker Blanket for Traeger: Best for Traeger 34 Series

Grisun Insulated Smoker Blanket for Traeger, insulated smoker blankets
9.2/10Our score
  • Fits Traeger 34 Series and Pro 34
  • Fits Texas Series
  • Replacement for Traeger BAC 628
  • 35 inches wide x 41 inches long
  • Silicone cloth and PVC coating

A Traeger 34 Series blanket with hooks and a buckle strap, sized at 35 x 41 inches for a close fit on that barrel.

See it on Amazon

Pros

  • Sized for Traeger 34 Series
  • Buckle strap helps secure it
  • Snow, water and wind resistant

Cons

  • Not for Costco Pro 34 or Century 34
  • Confirm your model before ordering

Grisun suits Traeger 34 Series owners who want a blanket cut for that barrel.

It fits Traeger 34 Series, Pro 34 series and Texas Series grills, and it is a replacement for Traeger BAC 628.

It does not fit Costco Pro 34 or Century 34 grills.

It measures 35 inches wide by 41 inches long with a thickness of 1 inch.

Grisun says that size helps maintain consistent grill temperatures and can reduce wood pellet consumption by 25% to 50%, with a 20% reduction in cooking duration.

Those are maker claims, and real savings depend on wind and outdoor temperature.

Hooks on the lower section and a buckle strap help secure it, so you do not need tools or drilling.

If your Traeger is a Pro 22 or Pro 575, the Unidanho blanket below is a better fit.

Grisun Insulated Smoker Blanket for TraegerCheck it on Amazon
5

Unidanho Grill Insulated Blanket for Traeger Pro: Best for Traeger Pro 22 and 575

Unidanho Grill Insulated Blanket for Traeger Pro, insulated smoker blankets
8.9/10Our score
  • Fits Traeger Pro 575, Pro 22, Pro 20
  • Fits Lil' Tex Elite
  • Replacement for BAC344 and BAC626
  • Ceramic fiberglass inner
  • Fiberglass fabric outer

A Traeger blanket for 22 and 575 series grills, with ceramic fiberglass inside and magnets plus a buckle strap to hold it.

See it on Amazon

Pros

  • Made for Traeger 22 and 575 series
  • Ceramic fiberglass inner layer
  • Magnets and buckle strap

Cons

  • Check grill size before ordering
  • Heavier at 3.36 kg

Unidanho suits Traeger Pro 22, Pro 575, Pro 20 and Lil' Tex Elite owners.

It is a replacement part for Traeger BAC344 and BAC626.

The inner layer is ceramic fiberglass, and the outer layer is fiberglass fabric on both the front and backing sides.

Built-in heat-resistant magnets help it click into place, and a buckle strap holds the lower part.

Unidanho says it can be used in winter, wind and snow, and that outside temperatures can reach 35 F or colder.

The blanket weighs 3.36 kg, so it is heavier than the cut-to-fit options.

If you own a Traeger 34, the Grisun blanket above is the closer match.

Unidanho Grill Insulated Blanket for Traeger ProCheck it on Amazon
6

kanhiro Fiberglass Welding Blanket 4x6 ft: Best large fiberglass blanket

kanhiro Fiberglass Welding Blanket 4x6 ft, insulated smoker blankets
8.6/10Our score
  • 4 x 6 feet
  • 24.7 oz/yd2 fiberglass fabric
  • Withstands up to 1022 F
  • 0.31 inch thickness
  • Metal grommets

A large 4 x 6 foot fiberglass blanket with grommets, useful as a general heat shield but not shaped for a smoker.

See it on Amazon

Pros

  • Large 4 x 6 foot size
  • Rated to 1022 F
  • Grommets for hanging

Cons

  • Wear gloves with fiberglass surface
  • Not water resistant
  • No fitted smoker shape

kanhiro suits an owner who wants a large, general-purpose heat blanket.

It measures 4 x 6 feet, or 72 x 48 inches, and is made of 24.7 oz/yd2 fiberglass fabric.

It withstands up to 1022 F, or 550 C, according to kanhiro.

Reinforced hems and metal grommets with a 0.59 inch inside diameter let you hang it as a vertical shield or drape it over equipment.

The blanket is 0.31 inch thick and weighs 3.9 pounds.

It folds to a compact size for storage, and kanhiro says not to cut it, but to fold it for a smaller size.

There is fiberglass on the surface, so kanhiro advises wearing gloves and not scratching it.

It is also not water resistant.

For a smoker, it works as a loose heat shield, not as a fitted winter blanket.

kanhiro Fiberglass Welding Blanket 4x6 ftCheck it on Amazon
7

PAWBOSE PWABOSE Thermal Blanket for Grill: Best cuttable blanket for mixed grills

PAWBOSE PWABOSE Thermal Blanket for Grill, insulated smoker blankets
8.3/10Our score
  • 35 x 40 inches
  • Carbon felt inner layer to 1100 F
  • Aluminum foil outer shell
  • Cuttable with scissors
  • High-temperature tape included

A 35 x 40 inch cuttable blanket with carbon felt inside and an aluminum foil outer shell, for grills that lack a fitted blanket.

See it on Amazon

Pros

  • Cut to fit your grill
  • Carbon felt inner to 1100 F
  • Tape included for a snug fit

Cons

  • Fluffy side must face the grill
  • Best below 40 F

PAWBOSE suits owners whose grill has no fitted blanket option.

It measures 35 x 40 inches and can be trimmed with scissors for a custom fit.

PAWBOSE says it fits Traeger Pro, Ironwood and Timberline series, Pit Boss, Camp Chef, Z Grills, Masterbuilt and many more, after trimming.

The fluffy inner layer is fireproof carbon felt that withstands up to 1100 F, and the outer layer is aluminum foil material that reflects heat back in.

PAWBOSE says to place the fluffy side inward, touching the grill.

Included high-temperature resistant tape helps hold it in place on windy days.

The trade-off is a strict use rule: use it only when the ambient temperature is below 40 F.

If you prefer a ready-made fit, a Pit Boss or Traeger blanket will save you the trimming step.

PAWBOSE PWABOSE Thermal Blanket for GrillCheck it on Amazon
8

FlameDuty Insulation Blanket for Pit Boss Lexington/Sportsman/Navigator: Best for Pit Boss 500 series

FlameDuty Insulation Blanket for Pit Boss Lexington/Sportsman/Navigator, insulated smoker blankets
8.1/10Our score
  • Fits Pit Boss Lexington, Sportsman, Navigator 550, 540, 500
  • Fits PB500NX, PB500SP, PB550G
  • Fire-resistant fiberglass
  • Grease and moisture resistant
  • 3.4 pounds

A fitted blanket for smaller Pit Boss 500 series pellet grills, with fiberglass layers for cold weather smoking.

See it on Amazon

Pros

  • Sized for Pit Boss 500 series
  • Grease and moisture resistant
  • Easy to wipe clean

Cons

  • Only suits listed 500 series models
  • Best below 40 F

FlameDuty suits Pit Boss Lexington, Sportsman and Navigator 550, 540 and 500 owners.

It fits models PB500NX, PB500SP and PB550G.

That smaller 500 series barrel needs a blanket sized for it, because a larger blanket will bunch and leave gaps.

The blanket is crafted from fire-resistant fiberglass and resists grease and moisture.

FlameDuty says it can reduce wood pellet usage by 25% to 50% and cut cooking times by over 20% in chilly weather.

Care is simple: wipe it down with a damp cloth or rinse it.

It weighs 3.4 pounds, so it is solid without being hard to handle.

FlameDuty recommends outdoor use in temperatures below 40 F and advises wearing gloves.

If your Pit Boss is an 820 or 850, the Utheer blanket for those models is a better match.

FlameDuty Insulation Blanket for Pit Boss Lexington/Sportsman/NavigatorCheck it on Amazon
9

SUNICO Smoker Insulation Blanket: Best fiberglass-free cut-to-fit blanket

SUNICO Smoker Insulation Blanket, insulated smoker blankets
7.9/10Our score
  • 40 x 35 inches
  • Carbon felt inner rated to 1100 F
  • Aluminum foil outer shell
  • Fiberglass-free felt
  • High-temperature tape included

A 40 x 35 inch cut-to-fit blanket with carbon felt inside and an aluminum foil shell, made without fiberglass.

See it on Amazon

Pros

  • Fiberglass-free felt
  • Cut to fit larger smokers
  • Water and snow resistant outer layer

Cons

  • Fluffy side must face inward
  • Best below 40 F

SUNICO suits owners who want a cut-to-fit blanket without fiberglass.

It measures 40 x 35 inches and can be cut to size.

SUNICO says it fits Traeger 34 Series, Pro 780 and 620, Woodridge, Pit Boss 650, 700 and 800, Z Grills 700, Masterbuilt 800 and 1050, Camp Chef 36 inch, and Royal Gourmet 30 inch models.

The inner layer is carbon felt rated to 1100 F, and the outer shell is aluminum foil that reflects heat back into the grill.

SUNICO says the fiberglass-free felt is gentle on skin compared with fiberglass alternatives.

The fluffy side faces inward, touching the grill.

Included high-temperature tape helps secure it, and SUNICO suggests wiping the surface with isopropyl alcohol before applying the tape.

The trade-off is the same as PAWBOSE: it is designed for winter use below 40 F, and you must trim it for a fit.

SUNICO Smoker Insulation BlanketCheck it on Amazon

Insulated smoker blanket comparison: fit, size and material

The fitted blankets win on fit, while the cut-to-fit blankets win on flexibility.

ProductBest forCompatible modelsMaterialClosureOur score
Utheer Grill Thermal Insulated Blanket for PitPit Boss vertical smokersPit Boss PBV4PS2, PBV4PS1, PBV4NX, PBV5PW1, PBV5P1Fabric with fiberglassDrawstring9.7
Utheer Thermal Insulated Blanket for Pit BossPit Boss 820 and 850 grillsPit Boss 820, 850, 800 series and Z Grill 700Weather-resistant fabric9.6
Matace Welding Blanket Fireproof 40x40 Inchcut-to-fit carbon felt option100% Carbon Felt9.5
Grisun Insulated Smoker Blanket for TraegerTraeger 34 SeriesTraeger 34 Series, Pro 34, Texas SeriesBuckle9.2
Unidanho Grill Insulated Blanket for Traeger ProTraeger Pro 22 and 575Traeger Pro 575, Pro 22, Pro 20, Lil' Tex Elite8.9
kanhiro Fiberglass Welding Blanket 4x6 ftlarge fiberglass blanketGlass fiber8.6
PAWBOSE PWABOSE Thermal Blanket for Grillcuttable blanket for mixed grills8.3
FlameDuty Insulation Blanket for Pit Boss Lexington/Sportsman/NavigatorPit Boss 500 seriesPit Boss 500 series, PB500NX, PB500SP, PB550G8.1
SUNICO Smoker Insulation Blanketfiberglass-free cut-to-fit blanket7.9

For a Pit Boss vertical smoker, fit beats raw size every time.

The Utheer blanket for Pit Boss vertical models is shaped for PBV4PS2, PBV4PS1, PBV4NX, PBV5PW1 and PBV5P1.

For a Pit Boss 820 or 850, the Utheer blanket for those models covers a wide list, including the 800 Series with chimney exhaust or back venting.

It also fits Z Grill 700 series grills of similar size.

For Traeger grills, model fit is just as strict.

Grisun is sized at 35 x 41 inches for Traeger 34 Series and Texas Series models.

Unidanho is made for Traeger Pro 575, Pro 22, Pro 20 and Lil' Tex Elite.

The Matace and kanhiro blankets are welding-style blankets, not smoker blankets.

Matace is 40 x 40 inches of 5mm carbon felt, and kanhiro is 4 x 6 feet of fiberglass.

Both can shield heat, but neither has magnets, hooks or straps made for a smoker barrel.

The PAWBOSE and SUNICO blankets sit in the middle.

Both are about 35 x 40 inches, cuttable, and built with carbon felt inside and aluminum foil outside.

FlameDuty, by contrast, is cut for Pit Boss 500 series models only.

How we compared these insulated smoker blankets

We compared fit first, then material, then attachment.

Fit decides whether a blanket will hold heat evenly or leave cold gaps along the barrel.

We checked each blanket's compatible model list against the grill it's sold for.

Grisun lists Traeger 34 Series and Texas Series models, and it states plainly that it does not fit Costco Pro 34 or Century 34.

We compared materials next.

Fiberglass blankets are the most common here, including both Utheer picks, Grisun, Unidanho, kanhiro and FlameDuty.

Carbon felt blankets include Matace, PAWBOSE and SUNICO.

PAWBOSE and SUNICO both pair carbon felt with an aluminum foil outer shell.

We checked heat ratings where makers gave them.

PAWBOSE and SUNICO rate their carbon felt to 1100 F.

kanhiro rates its fiberglass to 1022 F.

Matace says its carbon felt shields against flames below 1800 F.

We also checked attachment methods.

Magnets appear on both Utheer blankets and Unidanho.

Grisun uses hooks and a buckle strap.

PAWBOSE and SUNICO include high-temperature tape.

Matace and kanhiro have no smoker-specific attachment.

We did not test these blankets in person.

Scores come from specs, features and buyer feedback, weighed against the fit and use cases above.

Maker claims about pellet savings are labeled as claims in this guide.

Does an insulated smoker blanket really save pellets?

Yes, it can, but the savings depend on wind, outdoor temperature and your set temperature.

A blanket slows heat loss through the barrel, so the grill burns less fuel to hold the same temperature.

Grisun says its Traeger 34 blanket can save 25% to 50% of pellets and cut cooking duration by 20%.

FlameDuty makes a similar claim for its Pit Boss 500 blanket.

PAWBOSE says up to 30% for its cuttable blanket.

Treat those numbers as maker claims, not promises.

The best insulated smoker blanket for pellet savings is the one that fits your grill without gaps.

Wind matters as much as temperature.

A blanket that moves in wind loses contact with the barrel, and heat escapes at the edges.

Magnets, hooks, straps and tape all help with this.

Low-and-slow cooks benefit most.

If you run a Best Smoker For Brisket through winter, a fitted blanket is worth more than on a quick high-heat cook.

What size insulated smoker blanket do I need?

Measure your grill barrel, then match it to the blanket size or model list.

Model fit matters more than inches for fitted blankets.

Grisun measures 35 x 41 inches for Traeger 34 Series grills.

PAWBOSE and SUNICO measure about 35 x 40 inches and can be trimmed.

Matace measures 40 x 40 inches and can be cut.

kanhiro measures 4 x 6 feet and can be folded, but kanhiro says not to cut it.

For fitted blankets, check the model list first.

How to measure your grill

Measure the barrel length and height where the blanket will sit.

Compare those numbers with the blanket size before you buy.

Check the vent or chimney placement too.

Utheer notes fit for Pit Boss 800 Series grills with chimney exhaust or back venting.

A blanket that blocks a vent can cause problems, so confirm vent clearance.

Fitted blankets versus cut-to-fit blankets

Fitted blankets follow the shape of specific models.

They need no trimming and usually attach with magnets, hooks or straps.

Cut-to-fit blankets suit grills with no fitted option.

PAWBOSE, SUNICO and Matace can be trimmed or folded to size.

Welding blankets as smoker blankets

Welding blankets can work as loose heat shields.

Matace carbon felt and kanhiro fiberglass are both sold for welding and heat protection first.

They are not shaped for a smoker, and they have no magnets or straps.

If you use one, drape it carefully and check it during the cook.

Is it safe to use an insulated smoker blanket in winter?

Yes, when you follow the maker's use limits and keep the correct side facing the grill.

PAWBOSE and SUNICO are designed for use below 40 F.

FlameDuty also recommends outdoor use below 40 F.

Warm weather use can trap too much heat, so remove the blanket before grilling in summer.

Side orientation matters.

PAWBOSE says the fluffy carbon felt side must face the grill, with the aluminum foil shell outside.

SUNICO gives the same direction.

Keep the blanket clear of food and grease flare-ups.

Check it during long cooks, especially in wind, to make sure it has not shifted.

If you want a fitted blanket for a Pit Boss, our best pit boss smoker cover guide covers the matching covers for storage.

How do you install and care for an insulated smoker blanket?

Install it dry, on a cool grill, and follow the attachment method for your blanket.

For magnetic blankets like the Utheer and Unidanho picks, drape the blanket over the barrel and let the magnets click into place.

For Grisun, use the hooks on the lower section and the buckle strap to secure the lower part.

For PAWBOSE and SUNICO, drape the blanket with the fluffy side inward, then use the included high-temperature tape to hold it down.

SUNICO suggests wiping the surface with isopropyl alcohol before applying tape.

Velcro models, like the Utheer vertical blanket, let you open the door while the blanket stays on.

For care, wipe fitted blankets with a damp cloth or rinse them.

Let it dry fully before storage.

Store cut-to-fit blankets folded in a dry spot.

Fiberglass blankets like kanhiro need gloves for handling, because fiberglass on the surface can irritate skin.

Our guide to bbq cleaning tools covers the basics for keeping your grill and accessories in good shape through winter.

Which insulated smoker blanket is best for your grill?

Pick by grill brand and model first, then by material.

For Pit Boss vertical smokers, the Utheer blanket for PBV4PS2, PBV4PS1, PBV4NX, PBV5PW1 and PBV5P1 is the closest match.

For Pit Boss 820 and 850 grills, the other Utheer blanket covers the widest model list, including 800 Series grills.

For Pit Boss 500 series grills, FlameDuty is cut for PB500NX, PB500SP and PB550G.

For Traeger 34 Series grills, Grisun is sized at 35 x 41 inches and replaces Traeger BAC 628.

For Traeger Pro 22, Pro 575, Pro 20 and Lil' Tex Elite, Unidanho is made for those barrels and replaces BAC344 and BAC626.

If you are new to pellet grills, our What Is a Pellet Smoker? guide explains how they work.

For grills with no fitted blanket, PAWBOSE and SUNICO are cuttable options at about 35 x 40 inches.

Matace is a 40 x 40 inch carbon felt blanket you can trim.

kanhiro is a 4 x 6 foot fiberglass blanket you can fold, but it is not water resistant.

Our best traeger pellet grill cover guide covers Traeger options, and our best z grill pellet grill cover guide covers Z Grills models.

For Green Mountain grills, see our best green mountain smoker cover guide.

The best insulated smoker blanket for you is the one cut for your grill, with the right material for how you handle it.

Measure first, confirm your model, and cook through winter with steadier temperatures.

Our top 3 picks at a glance

  1. 1 Utheer Grill Thermal Insulated Blanket for Pit
    Best for Pit Boss vertical smokers

    Utheer Grill Thermal Insulated Blanket for Pit

    9.7/10 our score

    See it on Amazon
  2. 2 Utheer Thermal Insulated Blanket for Pit Boss
    Best for Pit Boss 820 and 850 grills

    Utheer Thermal Insulated Blanket for Pit Boss

    9.6/10 our score

    See it on Amazon
  3. 3 Matace Welding Blanket Fireproof 40x40 Inch
    Best cut-to-fit carbon felt option

    Matace Welding Blanket Fireproof 40x40 Inch

    9.5/10 our score

    See it on Amazon

Frequently asked questions

Does an insulated smoker blanket save pellets in winter?

Many makers claim lower pellet use in cold weather. Grisun says its Traeger 34 blanket can save 25% to 50% of pellets, while FlameDuty makes a similar claim for its Pit Boss 500 blanket.

PAWBOSE says up to 30% for its cuttable blanket.

Treat those as maker claims, not guarantees, because wind, outdoor temperature and your set temperature change the result.

Can I use a welding blanket as a smoker blanket?

You can use some welding blankets as a heat shield, but they are not shaped for a smoker. The Matace carbon felt blanket and the kanhiro fiberglass blanket can be draped or folded over a barrel.

A fitted blanket with magnets, hooks or straps will stay in place better in wind.

Check the heat rating and keep the correct side facing the grill.

Which side of a cut-to-fit blanket faces the grill?

The fluffy carbon felt side faces the grill on PAWBOSE and SUNICO blankets. The aluminum foil shell faces out to reflect heat back and resist weather.

PAWBOSE states the fireproof layer must face the grill.

SUNICO gives the same direction for its fluffy side.

Follow that direction, or the blanket will not work as intended.

What size insulated smoker blanket do I need?

Measure your grill barrel and compare it with the blanket size before you buy. Grisun is 35 x 41 inches for Traeger 34 models.

PAWBOSE and SUNICO are about 35 x 40 inches and can be trimmed.

Matace is 40 x 40 inches and can be cut.

Fitted Pit Boss and Traeger blankets are shaped for specific models, so model fit matters more than raw inches.

Can I leave an insulated blanket on in warm weather?

No, most makers limit use to cold weather. PAWBOSE and SUNICO say to use their blankets below 40 F.

FlameDuty also recommends outdoor use below 40 F.

Warm weather use can trap too much heat and create a safety risk.

Remove the blanket before grilling in warm conditions and store it dry.