Guide

How to Use a Masterbuilt Electric Smoker

Updated on · By the BBQ Smokers Review team

Using a Masterbuilt electric smoker starts with setting the temperature, adding wood chips, and letting the smoker preheat before food goes in. Keep the door closed during cooking, check food with a thermometer, and follow your model's manual for control details.

On this page (9 sections)
  1. What should you do before using a Masterbuilt electric smoker?
  2. How do you start a Masterbuilt electric smoker?
  3. How do you load wood chips into a Masterbuilt electric smoker?
  4. How do you place food inside the smoker?
  5. How do you control heat and smoke during cooking?
  6. What reference helps you understand smoking methods?
  7. How do you check whether smoked food is ready?
  8. How do you shut down and clean a Masterbuilt electric smoker?
  9. What is the simplest way to use a Masterbuilt electric smoker?

Using a Masterbuilt electric smoker starts with setting the temperature, adding wood chips, and preheating before you add food. If you use a pellet cooker instead, see how to use a Traeger pellet smoker.

Keep the door closed during the cook, monitor the food with a thermometer, and use your model's manual for exact control and tray instructions.

Masterbuilt has produced several electric smoker designs, so buttons, displays, chip trays, water pans, and racks can vary. The basic process stays similar: prepare the smoker, set the heat, add a controlled amount of wood, place the food inside, and clean the unit after it cools.

For another electric smoker, see how to use a Char-Broil electric smoker.

If this is your first smoker, begin with How to Use a Smoker for Beginners?. It explains the broader process before you focus on Masterbuilt controls.

What should you do before using a Masterbuilt electric smoker?

Place the smoker on a stable outdoor surface and check the manual before turning it on. Keep it away from walls, overhangs, dry materials, and areas where children or pets can reach hot surfaces.

Inspect the power cord, door seal, racks, chip tray, water pan, and grease area. Remove packaging materials and confirm that the interior is clean and empty before the first use.

Use the smoker outdoors in a well-ventilated area. Never operate it inside a home, garage, shed, tent, or enclosed porch because smoke and carbon monoxide can collect.

Make sure the smoker is close enough to a suitable outlet without using a damaged cord or unsafe extension setup. The manual for your exact model takes priority over general instructions.

How do you start a Masterbuilt electric smoker?

Plug in the smoker, select the cooking temperature, and set the cooking time if your model includes a timer. Press the power or start control, then allow the cabinet to heat before adding food.

The temperature buttons may use arrows, plus and minus controls, or a dial. Set a moderate smoking temperature first, then watch the display as the cabinet warms.

A display reading is useful, but it may not match the temperature at every rack. Heat can vary near the door, walls, heating element, and upper racks, so place food where it has room for smoke to circulate.

Let the smoker preheat with the door closed. Opening the door repeatedly releases heat and smoke, which makes the cook longer and less steady.

Masterbuilt's support resources can help you locate instructions for a particular model. Check the manual if the control panel uses a sequence that differs from these general steps.

How do you load wood chips into a Masterbuilt electric smoker?

**Put dry wood chips into the chip tray or loader designed for your model, without overfilling or forcing the tray closed. For a separate cold-smoking setup, see how to use a cold smoke generator.

A cold smoke tube is another option for that setup.** Use a wood type that suits the food and add more only according to the smoker's instructions.

Apple, cherry, and maple can suit lighter foods such as poultry and fish. Hickory and mesquite create stronger smoke, so use them carefully with foods that can handle a bolder flavor.

Do not use treated lumber, painted wood, construction scraps, or unknown wood. These materials can release unsafe chemicals when heated.

Avoid adding wood directly onto the heating element unless your manual specifically allows that design. The tray or loader controls how the chips contact heat, so bypassing it can damage the smoker or create a fire risk.

Smoke should be light and clean rather than thick and bitter. If the food is surrounded by heavy white smoke, reduce the amount of wood and check that the tray is not overloaded.

Should you use the water pan?

Use the water pan only as your model's instructions recommend. Water can add moisture to the cooking chamber and catch some drippings, but it does not replace temperature control or safe cooking.

Fill the pan carefully before the smoker becomes hot. Do not spill water near electrical parts, the control panel, the cord, or the heating element.

Check the pan during a long cook if your manual allows it. Use heat-resistant protection when handling hot parts, and never pour cold water onto a hot electrical smoker.

How do you place food inside the smoker?

Put food on the racks with space around each piece so heat and smoke can move through the cabinet. Keep food away from the walls, heating element, drip areas, and door.

Pat meat dry before seasoning if you want the surface to develop a firmer exterior. Arrange larger cuts where they will not block airflow around smaller pieces.

Use a separate thermometer for the food when possible. The smoker's display measures the cabinet setting or temperature, not the internal temperature of the meat.

For brisket ideas, see Best Electric Smoker For Brisket. For ribs, Best Electric Smoker For Ribs can help you compare the cooking approach and food size before you begin.

How do you control heat and smoke during cooking?

Keep the door closed and make small changes rather than chasing every temperature movement. Electric smokers can take time to recover after the door opens, especially in cool or windy weather.

Place the smoker where wind will not blow directly into the vents. Do not cover or block vents, and do not move the smoker while it is hot or operating.

Check the display at reasonable intervals. If the temperature changes sharply, inspect the door closure, power connection, chip tray position, and vents after switching the smoker off and allowing it to cool as needed.

A timer can help you remember a planned check, but it does not confirm that food is safe or finished. Internal temperature remains the important measure.

For another electric design, compare how to use a Cuisinart electric smoker. A charcoal setup follows a different heat-control method, explained in how to use a Weber Smokey Mountain smoker.

What if the smoker stops producing smoke?

Check the chip tray, heat setting, and power connection before adding more wood. A small amount of smoke can still flavor food, and visible smoke is not a reliable measure of cooking progress.

Do not open the electrical housing or bypass a safety control. Unplug the smoker and follow the manual if you smell burning insulation, see damaged wiring, or notice unusual sparks.

If you want another electric smoker workflow, read how to use a Pit Boss electric smoker. The control layout differs, but the same basics apply: steady heat, controlled smoke, and internal temperature checks.

What reference helps you understand smoking methods?

A barbecue reference can help you connect heat, smoke, seasoning, and food temperature. Meathead: The Science of Great Barbecue and Grilling is an illustrated 400-page English BBQ cookbook and smoker guide published by Harvest on May 10, 2016.

The book is 8.2 x 1.3 x 10.1 inches and weighs 2.86 pounds. It covers barbecue and grilling concepts, methods, equipment, accessories, and more than 100 thoroughly tested recipes.

It suits readers who want a deeper explanation of why smoking methods work. It may be more detail than you need if you only want a short startup checklist for one Masterbuilt model.

How do you check whether smoked food is ready?

Check the thickest part of the food with a food thermometer and use a trusted food-safety guide for the target temperature. Do not judge doneness by smoke color, cooking time, or the outside appearance alone.

Insert the probe into the thickest section without touching bone, a rack, or the smoker wall. For thin food, place the probe from the side so the tip reaches the center.

Large cuts can continue cooking after removal, but carryover varies. Rest food as appropriate for the recipe, then keep it at a safe temperature during serving and storage.

If the smoker's timer ends before the food reaches its target, continue cooking while monitoring the internal temperature. If food reaches its target early, remove it and handle it according to food-safety guidance.

How do you shut down and clean a Masterbuilt electric smoker?

Turn off and unplug the smoker, then let every part cool completely before cleaning. Remove leftover wood and ash only when the tray is cool enough to handle safely.

Wipe grease and food residue from the racks, water pan, drip area, and interior surfaces using cleaning methods approved by the manual. Do not spray water into the control panel, heating element, wiring, or electrical connections.

Empty and dry the water pan if you used one. Clean racks after each cook so old grease does not smoke during the next session.

Check the door seal and vents for buildup. Store the smoker dry and protected from rain, but do not wrap it while it is warm or damp.

What is the simplest way to use a Masterbuilt electric smoker?

Prepare the smoker, preheat it, add a controlled amount of chips, load the food with airflow space, and check internal temperature before serving. Use the manual whenever your control panel, chip system, or water pan differs from this general process.

Choose lighter wood for delicate foods and stronger wood for larger cuts, but start conservatively. Keep the door closed, avoid unsafe indoor use, and clean the smoker after it cools.

For beginners, the best next step is How to Use a Smoker for Beginners?. If you are choosing between electric models, compare the cooking workflow before focusing on extra controls.

Frequently asked questions

How long should a Masterbuilt electric smoker preheat?

Preheat the smoker until it reaches your chosen cooking temperature before adding food. The exact time depends on the model, weather, starting temperature, and set temperature, so use the control display as your guide and follow the manual for model-specific instructions.

How many wood chips should I put in a Masterbuilt electric smoker?

Start with a small amount that fits the chip tray without packing it tightly. Add chips only as your smoker's instructions allow, because too much wood can create harsh smoke.

The right amount also depends on the wood type, food, cooking time, and model.

Should I soak wood chips for a Masterbuilt electric smoker?

Follow your Masterbuilt manual before soaking chips. Many electric smokers are designed for dry chips in the chip tray, and wet chips can change how they heat and produce smoke.

Use only the tray and fuel method approved for your model.

How do I know when food is done in an electric smoker?

Use a food thermometer in the thickest part of the food and compare the reading with a trusted food-safety guide. Cooking time varies with food size, starting temperature, smoker temperature, weather, and how often the door is opened.